Make your own free website on Tripod.com

AMANA APPLIANCE CODES

Failure Code - glass link Electronic Range Control (ERC) Condition Check/Repair
Door flashing #0, 1, 2, 3 Broken latch switch Recommended to replace latch switch
Lock flashing Broken latch switch Recommended to replace latch switch
F0 Safety signal lost Recommended to replace adapter board
F1 Watchdog circuit Recommended to replace Electronic Range Control
F2 Oven overheating Recommended to replace oven temperature sensor
F3 F4 Temperature sensor shorten or open Recommended to replace oven temperature sensor
F7 Touch panel shortened Recommended to replace glass panel
F9 Door motorized Inspect latch switch
FF Lock error Inspect switch and motor
Electronic Range Control (ERC) III / Relay board with separate board / push buttons
F0 Push pad shortened Recommended to replace push pad
F1 Electronic Range Control failure Recommended to replace Electronic Range Control
F2 Oven overheating Recommended to replace oven temperature sensor
F3 F4 Temperature sensor shortened or open Recommended to replace oven temperature sensor
F5, F6, F8 Electronic Range Control failure Recommended to replace Electronic Range Control
F7 Sticking button/shortened Recommended to replace touch panel, check glass alignment
F9 Door latch failure Recommended to replace door latch switch or assembly

AMANA - Dual Convection Wall Oven

Failure Code Condition Check/Repair
F0 Touch pad shortened Recommended to replace touch pad
F1 Failure of Electronic Range Control Recommended to replace Electronic Range Control
F2 Oven temperature 100 degrees over the limit Recommended to replace oven temperature sensor
F3 Oven temperature sensor shorted Recommended to replace oven temperature sensor
F4 Open oven temperature sensor Recommended to replace oven temperature sensor
F6 Electronic range control component failure Recommended to replace Electronic Range Control
F7 Detected in self-clean lock circuitry failure Check door latch mechanism

 

AMANA - "Big Oven" 5.1 cubic ft. (Sigma Touchmatic ERC)

Failure Code Condition Check/Repair
F0-0 No Error Initial factory setting
F1-1 Over temperature as cooking Recommended to check oven temperature sensor and wiring, replace control board if oven temperature sensor is working
F1-3 Over temperature as cleaning Recommended to check oven temperature sensor and wiring, replace control board if oven temperature sensor is working
F1-5 Revoke key input out of range Recommended to replace control board
F1-7 Disconnected keyboard Inspect if the wire connection is tight. Recommended to replace control if failed
F1-8 Shorted key Recommended to replace control board
F1-9 Slave micro not operating Recommended to replace control board
F1-A Grounding circuit board Recommended to replace control board
F1-C Not calibrated control Recommended to replace control board
F1-E Corruption with circuit board data Recommended to replace control board
F1-F Corruption with circuit board data Recommended to replace control board
F1-H Failure of door switch input circuit Inspect switch and wiring
F1-J Failure of door switch input circuit Inspect switch and wiring
F3-1 Failure of oven temperature sensor or oven temperature sensor circuit Inspect wire connections and oven temperature sensor
F9-1 Auto latch will not lock Inspect wiring, latch switch, and motor
F9-2 Auto latch will not unlock Inspect wiring, latch switch, and motor